Monthly visual inspections of fire extinguishers are a simple way to ensure that they are in good working order. Conducting these monthly checks will help you avoid dangerous situations, such as not having an extinguisher when the need arises.
Below we have outlined some steps for conducting a monthly inspection:
-Verify that the pressure gauge on the fire extinguisher reads between 20 and 120 pounds per square inch (psi). If it does not read within this range, or if there is no pressure gauge at all, then replace or recharge the unit immediately.
-Look over any visible parts of the unit for cracks, corrosion, or other damage. If you find damage to any part of your fire extinguishant system,
replace or repair the unit immediately.
-Check to see if there is any corrosion on metal parts of the fire extinguisher, and look for any loose connections that may have occurred in a hose or valve. If you find either of these issues, fix them right away before they cause an issue during use.
How to conduct monthly visual inspections of fire extinguishers: Conducting these monthly checks will help you avoid dangerous situations, such as not having an extinguisher when the need arises. Below we have outlined some steps for conducting a monthly inspection: -Verify that the pressure gauge on the fire extinguisher reads between 20 and 120 pounds per square inch (psi). If it does not read within this range, or if there is a problem with the gauge, the extinguisher should be replaced.
-Check to see if there is any water or foam inside the fire hose. If there is, this means that it has been used and will need to be serviced soon. -If possible, bounce a small ball off of surfaces in the room while holding onto one end of an uncharged hose with your other hand for roughly ten minutes. This helps prevent corrosion by removing some of the deposits within it from use over time.*
*Note: For more information on how to conduct monthly inspections, contact your local fire department for tips on what they recommend doing during these checks!
How To Conduct Monthly Visual Inspections Of Fire Extinguishers | Safe And Smart Home Tips
Conduct visual checks at least once a month with your local fire department for tips on what they recommend doing during these checks!
There are a number of things you can do to help make sure that your family is safe. One way is by conducting monthly visual inspections of the extinguishers in your home. To conduct these inspections, check out our blog post titled “How To Conduct Monthly Visual Inspections Of Fire Extinguishers” to learn more about how it’s done and why this process should be followed as part of general safety practices. When you’re doing a monthly check you should check for everything visual and make sure there are no dents as this can be a problem and if a fire extinguisher is damaged you should log in to replace it. all types of fire extinguishers need to be checked monthly and co2 fire extinguishers need to be checked a bit more thoroughly as they can poison users.
your visual checks should be conducted at least once a month.
If you have any other tips for maintaining safety, please share them in the comment section below!
How to conduct monthly visual inspections of fire extinguishers: CONDUCTING FIRE EXTINGUISHER MONTHLY VISUAL INSPECTIONS
Conducting these inspections will help ensure that your family is safe and prepared should an emergency situation arise in your home. To learn more about how it’s done and why this process should be followed as part of general safety practices, check out our blog post titled “How To Conduct Monthly Visual Inspections Of Fire Extinguishers.”
When are you going to do the next inspection?
How to conduct monthly visual inspections of fire extinguishers: CONDUCTING FIRE EXTINGUISHER MONTHLY VISUAL INSPECTIONS
Conducting these inspections will help ensure that your family is safe and prepared should an emergency situation arise in your home. To learn more about how it’s done and why this process should be followed as part of general safety practices, check out our blog post titled “How To Conduct Monthly Visual Inspections Of Fire Extinguishers.”
When are you going to do the next inspection? Continue reading on for some tips! When are you planning on conducting another inspection? If there are any other products or procedures related to maintenance that I didn’t discuss